10-20KVA High Frequency Rack UPS (3:1)
Product Detail
Specification
Applications
Documents
Solution
Mercury series 3P/1P 10KVA-20KVA High Frequency Rack UPS is the high density version of double-conversion online UPS. With an output power factor 0.9 and 91% operating efficiency in online mode, it’s suitable for powering a wide range of devices such as servers, data center, industrial processes, telecommunication and security system. Besides, it is provided with input power factor correction function that helps to avoid any damage to the mains and also facilitate the connection of generator.
Function Features
• True double-conversion
• DSP technology guarantees high performance
• Output power factor 0.8
• Wide input voltage range (110-300 VAC)
• Built-in phase auto adapt function simplifies wire installation
• 50Hz/60Hz frequency converter mode
• Eco mode operation for energy saving (ECO)
• Emergency power off function (EPO)
• SNMP+USB+RS-232 multiple communications
• 3-stage extendable charging design for optimized battery performance
• Optional N+X parallel redundancy
Monitoring Software
• UPS can be connected to the computer via USB or Rs232 interface. So it can be realized LAN monitoring single or many sets of UPS, it also can monitor the other ups which connected to the computer via LAN.
• UPS monitoring software has more than 10 kinds of language for choice.
• Humanized operation interface, which is powerful and can shows the battery voltage, frequency, load, temperature and other data by real-time monitoring through the charts.
• Alarm of different power incident could be set by radio, mobile phone text messages, e-mails and SNMP etc.
|
High Frequency Rack UPS（Three- ins and Single out） |
||||
| MODEL |
PHR3110 |
PHR3115 |
PHR3120 |
|
|
PHR3110B |
PHR3115B |
PHR3120B |
||
| CAPACITY |
10000 VA/8000 W |
15000 VA/12000 W |
20000 VA/16000 W |
|
| INPUT | ||||
| Nominal Voltage |
3 x 400 VAC (3Ph+N) |
|||
| Voltage Range |
305-478 VAC (3-phase) at 100% load ; 190-520 VAC (3-phase) at 50% load |
|||
| Frequency Range |
46 Hz ~ 54 Hz or 56 Hz ~ 64 Hz |
|||
| Power Factor |
≧ 0.99 @ 100% Load |
|||
| THDi |
< 6% @ 100% Load |
|||
| OUTPUT | ||||
| Output voltage |
208/220/230/240VAC |
|||
| AC Voltage Regulation |
± 1% |
|||
| Frequency Range(Synchronized Range) |
46~54Hz or 56~64Hz |
|||
| Frequency Range (Batt. Mode) |
50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz |
|||
| Current Crest Ratio |
3:1 |
|||
| Harmonic Distortion |
≦ 2 % THD (Linear Load) ; ≦ 5 % THD (Non-linear Load) |
|||
| Transfer Time | AC Mode to Batt. Mode |
0 |
||
| Inverter to Bypass |
0 |
|||
| Waveform (Batt. Mode) |
Pure Sine Wave |
|||
| EFFICIENCY | ||||
| AC mode |
89% |
|||
| Battery Mode |
86% |
88% |
87% |
|
| BATTERY | ||||
| Standard Model | Battery Type |
12V/ 9 Ah |
||
| Numbers |
20 pcs(18 ~ 20 pcs adjustable) |
20 pcs x 2 strings (18 ~ 20 pcs adjustable) |
||
| Typical Recharge Time |
9 hours recover to 90% capacity |
|||
| Charging Current (Max.) |
1A |
2A |
||
| Charging Voltage |
273VDC ± 1% (Based on 20pcs batteries) |
|||
| Long-run Model | Battery Type |
Depending on the capacity of external batteries |
||
| Numbers | ||||
| Charging Current (Max.) |
4A |
|||
| Charging Voltage |
273 VDC ± 1% (Based on 20pcs batteries) |
|||
| INDICATORS | ||||
| LCD Display |
UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions |
|||
| ALARM | ||||
| Battery Mode |
Sounding every 4 seconds |
|||
| Low Battery |
Sounding every second |
|||
| Overload |
Sounding twice every second |
|||
| Fault |
Continously sounding |
|||
| PHYSICAL | ||||
| Standard Model | Dimension,DXWXH(mm) |
UPS unit:668 x 438 x 133(3U) |
UPS unit:668 x 438 x 266(6U) |
|
| Net Weight (kgs) |
UPS unit: 22 |
UPS unit: 45 |
||
| Long-run Model | Dimension, DXWXH(mm) |
668 x 438 x 133(3U) |
668 x 438 x 266(6U) |
|
| Net Weight (kgs) |
22 |
45 |
||
| ENVIRONMENT | ||||
| Humidity |
0-95 % RH @ 0- 40°C (Non-condensing) |
|||
| Noise Level |
Less than 58dB @ 1 Meter |
Less than 60dB @ 1 Meter |
||
| MANAGEMENT | ||||
| Smart RS-232 or USB |
Supports Windows 2000/2003/XP/Vista/2008, Windows 7/8, Linux, Unix, and MAC |
|||
| Optional SNMP |
Power management from SNMP manager and web browser |
|||
Remarks:Products specifications are subject to change without notice.
Data Processing Center
Office Automation
Telecom System
Network Rooms
Education System
National Defense System
Medical Equipment
Financial System
Securities System
Mercury Series High Frequency Rack UPS 10-20KVA (3:1)
