How to Choose Solar Inverter for Distributed PV System

How to Choose Solar Inverter for Distributed PV System - Prostar Inverter

Solar inverter in accordance with the installation environment can be divided into indoor inverter and outdoor inverter. Shell protection grade of indoor home solar inverter is low , forced air cooling is often adopted, higher requirements for installation site (requires a good ventilation system), the existing buildings need to be reformed to meet the requirements of installation environment, high cost; The outdoor solar inverter with natural cooling mode has high protection level (usually IP65), and the required environmental modification is few and the cost is low; At the same time, because the inverter is installed outdoors, the noise caused by the operation will be greatly reduced the impact on the users, but it needs good equipment protection.

On the other hand, the choice of the size of the inverter can be optimized according to the installation conditions. If the installation site is not clear in the initial design, the small power solar inverter should be chosen as possible, to realise the multi-channel independent power tracking, choose micro inverter to achieve the MPPT of single solar panels when necessary, so as to avoid the later problems caused by the space is not large enough, or the imbalance of power series not enough rules etc..

 

How to Choose Solar Inverter for Distributed PV System

 

https://www.prostarpower.com/solar-inverter


Post time: Sep-27-2017