Common Safety and Protection Features of an Inverter

Common Safety and Protection Features of an Inverter - Prostar

 

Inverters are the electronic equipment which changes over the Direct Current from solar panels and inverter batteries into Alternating Current. They provide a cost-effective power solution for people who require using several devices easily as they reduce the requirement of buying the DC balanced of basic home appliances and electrical devices. Inverters are lighter and smaller than power generators, and very easier to use and lesser expensive for maintaining as well.

Safety features of a power inverter:

To safeguard users and the devices from electrical damage, inverters are usually designed with safety and protection features. Let’s have a discussion on some of them:

 

1.Low-battery voltage shutdown:

There are many inverter models which shut down automatically while the battery drops to below 10.5V. The inverter can be used again only while you connect it to a battery with an output voltage of at least 11.6V direct current.

 

2.Low battery voltage alarm:

It is not good to discharge your battery completely. For this reason, some inverter models are designed with an alarm system which will help you know whether the battery has been around discharged totally. For instance, when the power of the battery goes below 11V, the inverter displays an image telling you to recharge the battery immediately.

 

3.Overheating protection:

Inverters produce heat when in use. Thereby, you should place them in well-ventilated areas for preventing them from overheating. However, when keeping the inverter in a dry or cool place is not sufficient, you can count on the overheating protection feature of the device. This feature turns the inverter off automatically when the temperature inside the unit increases above the acceptable range.

 

4.Overvoltage protection:

When it is bad for both the electrical devices and the inverter for being connected to a discharged battery, it is similarly bad for them for being used with a battery with overvoltage issues. For this reason, many inverters highlight the overvoltage protection feature in them. For instance, in an inverter, when the battery voltage exceeds 15V, the inverter automatically shuts down for protecting the appliances.

 

5.AC output overload shutdown:

For preventing a short circuit and the possible harm it will cause to an electrical device, this feature turns off the inverter automatically when it is producing too much AC electricity. It also shuts the inverter down when the device or load connected to the inverter exceeds its functioning limits.

 

Common Safety and Protection Features of an Inverter

  WWW.PROSTARPOWER.COM


Post time: Oct-18-2017
WhatsApp Online Chat !