Prostar 80KVA UPS Applied to Hong Kong International Airport

Prostar 80KVA UPS Applied to Hong Kong International Airport

INQUIRY DETAILS *

INQUIRY DETAILS
  • captcha

Product Detail

Airport UPSAirport UPSAirport UPSAirport UPSAirport UPSAirport UPSAirport UPSAirport UPSAirport UPSAirport UPSAirport UPS

Prostar 80KVA UPS Applied to Hong Kong International Airport

Project Location: HongKong

 

HongKong UPSHongKong UPS

The Hong Kong International Airport Automated People Mover is a driverless people mover located withinHong Kong International Airport. It operates in two “segments” within Terminal 1 and between Terminals 1 and 2, and also connects to the Skypier.
The first segment runs between the East Hall and the West Hall in Terminal 1. The segment aims to provide a faster and easier way for passengers travelling between immigration and boarding gates at the far end of the Terminal. Westbound service is for departure passengers only, while eastbound service is for arrival passengers only. After arriving the West Hall, departure passengers should approach the boarding gates nearby and board their plane. Passengers are not allowed to take the APM back to the East Hall, where most shops are located. For eastbound service, after reaching the East Hall, all arrival passengers must disembark for immigration, customs, and baggage claim. Also, arrival passengers are not allowed to take the APM back to the West Hall. Since both the East Hall and the West Hall are located within Terminal 1, passengers can choose to instead use travellators or walk, though this will be more time-consuming.

The second segment of the system runs from the SkyPier to Terminal 2 and then continues to the East Hall of Terminal 1. Different from the first segment, the second segment is the only means by which these three places are connected. SkyPier passengers heading for departing flights must take the westbound service of this segment to the East Hall of Terminal 1. SkyPier passengers are not allowed to alight at Terminal 2. Departure passengers from Terminal 2 can join the westbound service of the second segment from Terminal 2. All passengers must leave the train when it arrives at the East Hall of Terminal 1. Then, depending on the boarding gate location of their onward flight, passengers can choose to change to the first segment of APM system at the opposite platform of the East Hall, to continue their way to the West Hall, or simply approach the boarding gate directly from the East Hall. The eastbound service is only for arrival passengers heading to SkyPier for ferry service to PRD ports. Ferry tickets will be checked before passengers may board the APM. Once arriving at the SkyPier, passengers are not allowed to travel back to Terminal 1. Since there is no eastbound platform in Terminal 2, there is no intermediate station for the eastbound service.
The section from the East Hall to SkyPier is for SkyPier passengers and staff only. The first segment began operations in 1998, while the second segment began operations in early 2007. SkyPier extension was opened to the public in late 2009.

Application Products:

Uranus Series Low Frequency Online UPS

Model:HT80K

Capacity:80K/64KW

Battery Voltage: 384V

Phase: Three phase ins / Three phase outs

 

HongKong Online UPSHongKong Online UPSHongKong Online UPSHongKong Online UPS

Product Introduction:

Uranus Series Low Frequency Online UPS is adopting the technology , which combined with the world’s most advanced DSP digital control technology currently, and IGBT high frequency Pulse Width Modulation technique (PWM).Double-conversion online topology design makes the output frequency of UPS, which used for tracking, phase-locking, voltage regulator and filter out noise, interference from the power grid fluctuations in pure sine wave power supply, and make the UPS more comprehensive and perfectly protection for the users. After Prostar R&D center elaborative designed for more than 10 yeas, Prostar has designed a modular structure, whose overall operation is 5 times more reliable and stable performance than regular UPS, MTBF is over 300,000 hours.

 

Preformance Characteristics:

1) DSP digital control technology
2) Advanced IGBT inverter technology
3) Pure-online double conversion technology
4) Perfect protection
5) Powerful Redundant Parallel Connection Function
6) Powerful communication system
7) Low-power dissipation but high-efficiency
8) Prediction warning system
9) Humanized panel display
10) Super-strong environment adaptability
11) Powerful Overload Ability




Related Products

INQUIRY DETAILS *

INQUIRY NOW
  • captcha