Prostar polycrystalline 300w panel solar from china high efficiency
Place of Origin:
Guangdong, China (Mainland)
Number of Cells:
Solar Cell Type:
Polycrystalline 156×156 mm
Anodized Aluminium Alloy
3.2mm, High Transmission, Low Iron,Tempered Glass
MC4 Compatible Connector
4mm2 , Length:900 mm
-40℃ to +85℃
25 Years Output Power Guarantee
Packaging & Delivery
|Packaging Details:||5PCS and 10PCS Solar Panels are packed by one plywood wooden box, Standard package is 24PCS/25PCS/30PCS Solar Panels are packed by one plywood pallet.|
|Delivery Detail:||15 days|
Prostar 300 Watts 36 Volts Polycrystalline Solar Panel is the first step to converting your house to solar. Whether you want to connect this to the electrical grid, or power your off-grid cabin, Prostar 300W Polycrystalline Solar Panels will be the key element to your solar system.
|Product Warranty||10 years limited product warranty|
|Power Warranty||15 years at 90% of the minimal rated power output
25 years at 80% of the minimal rated power output
|Maximum Power (Pmax)||300Wp||219Wp|
|Maximum Power Voltage (Vmpp)||36.0V||33.3V|
|Maximum Power Current (Impp)||8.33A||6.59A|
|Open Circuit Voltage (Voc)||45.0V||42.4V|
|Short Circuit Current (Isc)||9.00A||7.24A|
|Module Efficiency STC||15.62%|
|Operating Temperature Range||-40°C to +85°C|
|Maximum System Voltage||1000VDC (IEC)|
|Series Fuse Rating||15A|
|Temperature Coefficient of Pmax||-0.44 %/°C|
|Temperature Coefficient of Voc||-0.33 %/°C|
|Temperature Coefficient of Isc||0.055 %/°C|
|Nominal Operating Cell Temperature(NOCT)||45±2°C|
|Cell Type||Polycrystalline 156×156 mm|
|Front Glass||3.2 mm, High Transmission, Low Iron,Tempered Glass|
|Frame Type||Anodized Aluminium Alloy|
|Junction Box Protection Class||IP 67 Rated|
|Output Cables||4 mm², Length:900 mm|
|Standard Test Conditions (STC): Irradiance 1000W/m2, AM 1.5, Cell temperature 25°C
Nominal Operating Cell Temperature (NOCT): Irradiance 800W/m2, AM 1.5, Wind Speed 1m/s, Ambient temperature 20°C
Solar panel micro cracks, or more precisely micro cracks in solar cells pose a frequent and complicated challenge for manufacturers of photovoltaic (PV) modules.
There are different quality testing methods to identify micro cracks of which electroluminescence (EL) or electroluminescence crack detection (ELCD) testing is one of the most applied method.
EL testing can detect hidden defects that were before untraceable by other testing methods, such as infrared (IR) imaging with thermal cameras, V-A characteristic and flash testing.
It is an image analysis and measurement process allowing to peer directly into the cells of a pv module and locate potential inherent defects.
Optimally, EL testing is performed once before lamination so that the defect solar cells can be replaced and then again after (careful) lamination.
Visually, micro-cracks may appear in form of so called snail trails on the cell structure. However, snail trails – as a long-term impact sign – can also be the result of chemical process causing the surface of the cell to change and/ or hot spots.
Therefore, visual checking of PV modules alone is not an effective method to identify micro-cracks and should not replace a thorough EL test.
Normally packing: 1pc/2pcs/4pcs/5pcs/10pcs/20pcs per carton
Individual packing requirement is acceptable.
|Packing Information||300W Solar Panel|
|Container||20′ GP||40′ GP|
|Pallets per Container||10||24|
|Pieces per Container||240||576|
Material in stock can be produced (procedure 7-20days) right away after pre-payment confirmation. COSCO/Mearsk/MSC/HPL ship to worldwide for safe shipping, don’t worry about package damage or loss. It takes about 15-40 days to worldwide, Please note us your contact details include your phone number for easy contacting from shipping company officer.
|By Sea||Delivery from Foshan or Guangzhou seaport|
|By Air||Departure from Guangzhou Internation Airport|
|By Express||Post by DHL, EMS, UPS, TNT, FedEx.|
|T/T||30% T/T in advance, paid the balance before shipment|
|L/C||L/C amount above 1,000,000 usd, we can accept L/C at sight|
Amount lower than 5000usd
|Delivery time||5-7 working days after receiving payment for one container|
Contact us today to determine if you can take advantage of state solar energy incentives!